Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bimetal Cable Lugs Free Sample
#1
CAL Bimetal Cable Lugs
Type No.: CAL-B
Material:E-Cu; Al-99.6%
Suitable conductor: from 16mm2 to 630mm2.
Technical Requirements:
1. Due to the coupling effect when Aluminum Comes in contact with copper, corrosion will happen in the short time. The best solution is to use aluminum-copper bi-metal connectors. It is according with IEC 61238-1.
2. The transition section between aluminum and copper is produced by friction welding, bending 180°, no breaking weld.
3. The marking should be clearly, well-proportioned with the depth of 3mm;
4. Closed angle and edge curl are not allowed at the mouth of the pipe.
5. Acid-clearing surface. Note: copper palm for CAL-500B & CAL-630B is square.

Type No.Main Dimensions(mm)Note
DdLL1AΦ
CAL-16B165.585432110.5  
      
      
      
      
    FIG.1
     
CAL-25B166.585432110.5
CAL-35B168.085432110.5
CAL-50B209.0904325.612.8
CAL-70B2011.0904326.512.8
CAL-95B2012.5904326.512.8
CAL-120B2513.71155926.512.8
CAL-150B2515.5115593012.8
CAL-185B3217.0115593012.8
CAL-240B3219.5115593012.8
CAL-300B4023.3160933516.5
CAL-400B4026.0160933516.5
CAL-500B4729.12009410x60x6016.5FIG.2
CAL-630B4732.52009410x60x6016.5Bimetal Cable Lugs Free Sample
website:http://www.kss-terminals.com/cable-lugs/bimetal-cable-lugs/


Forum Jump:


Users browsing this thread: 1 Guest(s)